To Next Page

To Previous Page

3.3.12 Time and Date

This function allows the time and date in the panel to be changed. On entry to the function, the display shows

the current time and date with confirmation of the day of the week on the bottom line. For example:

[SET TIME/DATE]

TIME = 15:28

DATE = 15/04/07 SUN 15 APR 2007

To change the settings, use the  buttons to highlight the required option. Directly enter the new time or date

using the number buttons. As soon as a number button is pressed, the display will clear the current setting and

show the new value as it is entered. For example:

[SET TIME/DATE]

TIME = 1-:--

DATE = 15/04/07 SUN 15 APR 2007

3.3.13 View Options

The View Menu Options are identical to those available during Level-2 operation.

For further information on the View Options and the information that is presented, refer to the User Manual

(Document No. 680-159).

3.3.14 Passwords

The panel provides up to 10 User Level-2 passwords and 2 Level-3 passwords. All of the passwords

can be

changed.

On entry to the function, the display shows a list of the passwords. For example:

Password Access level User ID

15633 2 01

9988 2 02

13344 2 03

10000 2 04

10000 2 05

To change a password, use the  buttons to highlight the required password and then enter the new

password using the number buttons. When the password is correct, press the ✔ button to confirm.

Level-3 Passwords.

Care should be taken when changing the Level-3 password. If this new number is lost, it is not

possible to enter commission mode functions.

Refer to 5.1 for further information.

The factory default level 3 password is 7654

The passwords can be further qualified using the PC CONFIG TOOL to provide permission / restriction to specific menu options. See

User Manual 680-159 and PC CONFIG TOOL Manual for further details.

Advanced MxPro4 User Manual

Other manuals for Advanced MxPro4