Advantech FWA-3260 - Table 47: RJ45 10;100;1000 Base-T Connector Pin Assignment; Table 48: RJ45 Connector LED Indication

FWA-3260 User Manual v02_20160302.docx Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 96
Pin No.
Signal Name
Description
3
MDI[1]+
Media Dependent Interface[1]+
4
MDI[2]+
Media Dependent Interface[2]+
5
MDI[2]-
Media Dependent Interface[2]-
6
MDI[1]-
Media Dependent Interface[1]-
7
MDI[3]+
Media Dependent Interface[3]+
8
MDI[3]-
Media Dependent Interface[3]-
Table 47: RJ45 10/100/1000 Base-T connector pin assignment
A.3.2) LED Definition
Speed LED
Left
(Green / Amber
Color)
Link/Active LED
Right
(Green / Amber Color)
10 Mbps
Off
Link
Turn on Green
100 Mbps
Static Amber
Active
Blinking Green
1000 Mbps
Static Green
Bypass Status:
Disconnect
Blinking Amber
Bypass Status:
Bypass
Static Amber
Table 48: RJ45 connector LED indication
Note: Bypass States are only signalled on the traffic LAN ports. Management LAN ports do
not have this extra LED colour & signalling.