VP-8-V2 and VP-16-V2 Series Encoder
·
User Manual
58
Chapter 7 Maintenance
7.1 Viewing Device Information
Click Remote Configuration > Device Parameters > Device Information to enter the Device Information interface
of the encoder:
Figure 7. 1 1 Device Information
You can edit the Device Name and Device No., and view the device information, including Model, Serial No.,
Firmware/Encoding Version, Number of Channels, Number of HDDs, and Number of Alarm Input/Output.
7.2 Maintenance
Click Remote Configuration >Maintenance to enter the Maintenance interface of the encoder:
To Next Page
Loading...