AGCO SimplEbale - 3.1.3 Machine status and indicators

Icon Description
Baling efficiency
Bales made each hour.
Bale moisture
Moisture of the bale measured. If the baler has the moisture sensor, the terminal
shows the moisture of the bale measured by the sensor.
Bale length
Length of the bale in the baler and the length of last bale made.
Flake size
Dimension of the last flake made.
3.1.3 Machine status and indicators
Fig. 2
The machine status icons show the machine status.
This data shows as values and indicators where
applicable. The applicable icons show the values.
3 Operation
26
SimplEbale