5.4 Fault codes
5.4.1 Fault codes overview
Go to the fault code menu to see stored fault codes. You can configure the home screen to show the fault
code menu.
Icon Description
Fault code menu
5.4.2 Erase a fault code
Procedure
Fig. 3
1. Move the cursor with the keypad buttons to the
applicable fault code.
2. Press the OK button on the keypad.
NOTE: The fault code details display.
3. Press the button to the delete the fault code.
NOTE: It is not possible to delete active fault
codes.
5.4.3 Fault codes
Fault title on
display
Fault code System Fault level System condition
description
Keyswitch battery
potential
158 Standard High Battery voltage is
higher than 16 V
Keyswitch battery
potential
158 Standard High Battery voltage is
lower than 10.5 V
Hydraulic pressure 1762 Standard High Valve pressure is
higher than 200 psi
5 Troubleshooting
SimplEbale
91
To Next Page
Loading...
