4.2 Bleed the air from the hydraulic density control valve
WARNING: The machine or parts can move without notification.
The parts that move can cause death or injury.
Before you do work on the machine:
If an implement is on the machine, lower the implement to the ground.
Stop the engine.
Remove the ignition key.
Disconnect the PTO shaft.
WARNING: Entanglement with the PTO shaft.
Risk of death or injury.
Make sure that the guards are in position and always operate correctly.
If a guard breaks or is missing, repair or replace it before you use the machine.
CAUTION: Personal Protective Equipment is mandatory.
This procedure can cause injury.
Put on Personal Protective Equipment when you do this procedure.
4 Maintenance
SimplEbale
61
To Next Page
Loading...
