3.10 Do this procedure before you make a bale
DANGER: Moving components.
Risk of death or injury.
The operator of the machine must make sure that no person goes in the dangerous areas
during operation.
Procedure
Fig. 17
(1) Moisture sensor
(2) Bale scale
(3) Knotter fan
(4) Knotter lubrication
(5) Bale chamber pressure monitor
(6) Bale chamber pressure control
(7) Baler model
1. Set the necessary baler options to ON if the
baler has the necessary components.
3 Operation
44
SimplEbale
To Next Page
Loading...
