AGCO SimplEbale User Manual

Fault title on
display
Fault code System Fault level System condition
description
Sensor power 2 fault
3509 Standard High Sensor voltage is
lower than 4.5 V
Sensor power 2 fault
3509 Standard High Sensor voltage is
higher than 5.5 V
Sensor power 1 fault
3510 Standard High Sensor voltage is
lower than 8.5 V
Sensor power 1 fault
3510 Standard High Sensor voltage is
higher than 9.5 V
Hydraulic pressure
sensor
520201 Hydraulic and load
control
High Standard input fault
Decompress
solenoid fault
520205 Hydraulic and load
control
Low Standard output fault
Pressure control
solenoid fault
520206 Hydraulic and load
control
High Standard output fault
Hydraulic response
fault
520207 Hydraulic and load
control
Low The bailer is ON and
the hydraulic
pressure is 50 psi
lower than the
applicable pressure
Rear keypad fault 520401 Keypad Low The keypad does
not connect to the
machine for more
than 3 seconds
while the machine is
in operation.
The machine can
not connect to the
keypad for more
than 5 seconds after
the machine is set to
ON.
5 Troubleshooting
92
SimplEbale

AGCO SimplEbale Specifications

General

Brand	AGCO
Model	SimplEbale
Category	Farm Equipment
Language	English