Purification Solution - Developer's Guide 25
Preparing Default Purification Methods
2
Critical Method Parameters
Preparative
default method
(Purification
software base
method)
• Valve 2/10: Position > Use valve position > select correct preparative position
• Iso. Pump (with splitter): Flow > target make-up flow must be set before use
• UIB II (with MSD): Expected ERI Mode > MSD (for MS based fraction
collection)
• UIB II (with active splitter): Timetable > set for correct active splitter
operation
• UIB II (with active splitter): External contacts > set for correct active splitter
operation
• Set up active splitter split ratio and operation mode to Local
Note that some points also apply to stand-alone analytical systems.
To Next Page
Loading...
