16 Purification Solution - Developer's Guide
2
Preparing Default Purification Methods
Analytical Method Settings
Analytical Method Settings
Only for the combined analytical and preparative system.
Load the general settings of the purification method:
General_Purification(“General Method Settings” on page 11)
Save the method as
Analytical_Purification:
• Method > Save Method As.
Quaternary Pump (G1311B)
Prep Pump Cluster (G1361A and G1391A)
Prep. Pump (G7161A)
Prep. Pump (G7161B)
Flow 1.0 mL/min
Advanced Set Maximum Flow Gradient to about 10 times the target flow.
Flow 0mL/min
Flow 0mL/min
Flow 0mL/min
To Next Page
Loading...
Need help?
General
