Purification Solution - Developer's Guide 3
In This Book
In This Book
This manual contains instructions for Method Developers on how to use the
Automated Purification software.
1 The Role of the Method Developer
This chapter describes the role of the user of the Automated Purification
Software in Expert mode.
2 Preparing Default Purification Methods
This chapter describes the three default Purification methods that can be used
as a basis for the development of specific Purification methods.
3 Setting Up an Analytical and Preparative System
This chapter gives step-by-step instructions on setting up the analytical
system and the preparative system in the Automated Purification software.
4 Setting Up and Running a Purification Task
This chapter gives instructions for the most important steps for setting up and
running a Purification Task.
5 Reviewing Purification Results
This chapter describes how to review the results of a Purification Task.
6 Calibration Procedures
This chapter gives step-by-step instructions for the important calibration
procedures for the Purification system.
7 Checkout Procedure
This chapter gives step-by-step instructions on how to carry out a checkout
procedure to confirm the correct operation of your Purification system.
To Next Page
Loading...
Need help?
General
