44 1260 Infinity Micro Degasser Service Manual
6 Troubleshooting and Diagnostics
Overview of the Degasser's Indicators
Overview of the Degasser's Indicators
Status Indicators
The micro vacuum degasser is provided with two status indicators which
indicate the operational state (ready, busy, and error states) of the micro
vacuum degasser. The status indicators provide a quick visual check of the
operation of the micro vacuum degasser (see “Status Indicators” on
page 45).
Hardware Symptoms
A red status lamp at the micro vacuum degasser indicates a problem with
the vacuum system or with the electronic control. The micro vacuum
degasser generates an error output on the remote lines. The following
pages describe hardware symptoms which help you to isolate the cause of
a hardware failure (see “Hardware Symptoms” on page 47).
To Next Page
Loading...
Need help?
General
