1260 Infinity Micro Degasser Service Manual 27
Installing the Micro Vacuum Degasser
3
Transporting the Micro Vacuum Degasser
Transporting the Micro Vacuum Degasser
1 Pull the solvent inlet tubing out of the solvent bottle of channel A.
2 Let the pump draw solvent and air through channel A of the degasser,
until the chamber of channel A is completely dry.
3 Repeat these steps for the remaining solvent channels.
Solvents leaking out
Solvents remaining in the solvent channels may leak out during transport. This can
possibly cause personal damage.
➔ Drain any remaining solvents from the degassing channels before transporting the
degasser.
To Next Page
Loading...
Need help?
General
