58 1260 Infinity Micro Degasser Service Manual
7 Maintenance
Introduction to Maintenance and Repair
Assembling the Main Cover
When If cover is broken
Tools required None
Parts required # p/n Description
1 5065-9989 Cover kit (includes base, top, left and right)
Wrong assembly
Once installed wrongly, you may not be able to remove the side from the top part.
➔ Make sure to install the side parts in the correct orientation.
The cover kit contains all parts, but it is not assembled.
1
Place the top part on the bench and insert the left and
right side into the top part.
2 Replace the cover.
To Next Page
Loading...
