54 1260 Infinity Micro Degasser Service Manual
7 Maintenance
Introduction to Maintenance and Repair
Cleaning the Instrument
The micro vacuum degasser case should be kept clean. Cleaning should be
done with a soft cloth slightly dampened with water or a solution of
water and a mild detergent. Do not use an excessively damp cloth that
liquid can drip into the micro vacuum degasser.
Liquid dripping into the electronic compartment of your module can cause shock
hazard and damage the module
➔ Do not use an excessively damp cloth during cleaning.
➔ Drain all solvent lines before opening any connections in the flow path.
To Next Page
Loading...
Need help?
General
