130 16900 Series Logic Analysis Systems Installation Guide
7 Solving Problems
If there are multiframe connection problems
All 1 Gbit LAN cards in a multiframe set up must be set with the same
Jumbo Frames setting. Also, if a switch/hub is used, you must ensure that
it supports the same size Jumbo Frame setting. If all 1 Gbit LAN cards
are not set with the same Jumbo Frames setting, you might get error
messages indicating so.
• One or more of the frames is not completely initialized yet... Please wait
a few seconds.
To check the Jumbo Frames setting:
1 Choose Start>Control Panel. In the Control Panel window, open
Network Connections.
To Next Page
Loading...
Need help?
General
