34405A User’s and Service Guide 5
Additional Notices
This product complies with the WEEE Direc-
tive (2002/96/EC) marking requirement.
The affixed product label (see below) indi-
cates that you must not discard this electri-
cal/electronic product in domestic
household waste.
Product Category: With reference to the
equipment types in the WEEE directive
Annex 1, this product is classified as a
"Monitoring and Control instrumentation"
product.
Do not dispose in domestic household
waste.
To return unwanted products, contact your
local Agilent office, or see
www.agilent.com/environment/product
for more information.
The Agilent 34405A is provided with an Agi-
lent 34138A Test Lead Set, described below.
Tes t Le ad Ra tin gs
Test Leads - 1000V, 15A
Fine Tip Probe Attachments - 300V, 3A
Mini Grabber Attachment - 300V, 3A
SMT Grabber Attachments - 300V, 3A
Operation
The Fine Tip, Mini Grabber, and SMT Grab-
ber attachments plug onto the probe end of
the Test Leads.
Maintenance
If any portion of the Test Lead Set is worn or
damaged, do not use. Replace with a new
Agilent 34138A Test Lead Set.
WARNING
If the Test Lead Set is used in a
manner not specified by Agilent
Technologies, the protection pro-
vided by the Test Lead Set may be
impaired. Also, do not use a dam-
aged or worn Test Lead Set.
Instrument damage or personal
injury may result.
34405A users guide.book Page 5 Saturday, September 2, 2006 3:38 PM
To Next Page
Loading...
Need help?
General
