Agilent Technologies 34410A User Manual

10 34410A/11A User’s Guide
The Display at a Glance
For a complete description of the front panel displays and
annunciator indications, see “Front Panel Display" on
page 39, and“Annunciators" on page 41.
The following key refers to the primary front- panel display.
1 Primary Display Line
2 Secondary Display Line
3
*
Annunciator (on during a measurement)
4 Hi-Z (high input impedance) Annunciator
5 OComp (offset compensation) Annunciator
6 ManRng (manual ranging) Annunciator
7 Trig (wait-for-trigger state) Annunciator
8 Hold (reading hold) Annunciator
9 Remote (remote interface operation) Annunciator
10 Error (detected error) Annunciator
11 Null (null function enabled) Annunciator
12 Shift (shift key just pressed) Annunciator
13 Math (dB or dBm function enabled) Annunciator
14 Stats (statistics functions enabled) Annunciator
15 Limits (limit test function enabled) Annunciator
16 Rear Annunciator
17 4W (four-wire ohms or temperature) Annunciator
18 (continuity test function enabled) Annunciator
19 (diode check function enabled) Annunciator

Agilent Technologies 34410A Specifications

General

Brand	Agilent Technologies
Model	34410A
Category	Multimeter
Language	English