34410A/11A User’s Guide 93
Remote Interface Configuration 3
34410A/34411A Web Browser Interface
The multimeter provides a built–in Web Interface. You can use this
interface over LAN for remote access and control of the multimeter via a
Java enabled Web browser, such as Microsoft® Internet Explorer.
• To access and use the 34410A/34411A Web Interface:
1 Establish a LAN interface connection from your computer to the
multimeter.
2 Open your computer’s Web browser.
3 Launch the 34410A/34411A Web Interface by entering the IP address
of your multimeter, or its fully–qualified host name, in the browser
address field. The following welcome screen appears:
4 Follow the instructions in the Web Interface’s on–line Help.
To Next Page
Loading...
