34410A/11A User’s Guide 51
Features and Functions 2
Multimeter State Storage
The current multimeter state, including all settings for measurement
configuration, math operations, triggering operations, system operations
and I/O configuration, can be saved in one of five system memory states,
and subsequently recalled. Store State 0 retains the multimeter
configuration at power down. Store States 1 through 4 are available for
storing other configurations.
• Front Panel Operation: To store the current multimeter state, press
. UTILITY MENU will be displayed. Press as needed to
select STORE/RECALL, and press . Select STORE, and press . STORE
STATE will be displayed on the secondary display line. Press as
needed to select 1: STATE_1, 2: STATE_2, 3: STATE_3, or 4:STATE_4, and
press . CHANGE NAME will be displayed, along with the current state
name on the secondary display line. Use the navigation keypad to enter
a name of your choice for the selected multimeter state, up to twelve
characters in length, and press . STATE STORED will be displayed
briefly.
To recall any of the five stored multimeter states, enter the STORE/RECALL
level of the UTILITY MENU. Press as needed to select RECALL, and press
. RECALL STATE will be displayed, along with any stored states, on the
second display line. Press as needed to select a stored state, and
press . STATE RECALLED will be displayed briefly.
To name any manually stored state (1 through 4), enter the STORE/RECALL
level of the UTILITY MENU. Press as needed to select RENAME, and press
. RENAME STATE will be displayed, along with any stored states, on the
second display line. Press as needed to select a stored state, and
press . CHANGE NAME will be displayed. Use the navigation keypad to
change the name of the selected state, up to 8 alphanumeric characters.
CHANGE SAVED will be displayed briefly.
To delete any manually stored state (1 through 4), enter the STORE/RECALL
level of the UTILITY MENU. Press as needed to select DELETE, and press
. DELETE STATE will be displayed, along with any stored states, on the
second display line. Press as needed to select a stored state, and
press . STATE DELETED will be displayed briefly.
To Next Page
Loading...
