50 34410A/11A User’s Guide
2 Features and Functions
During a measurement session, configuration settings may be saved in one
of four Stored States, for recall after a power–on or reset operation. See
“Multimeter State Storage” on page 51 for more information.
System–Related Operations Factory Setting
● Beeper Mode ● On
● Radix Character ● Period
● Thousands Seperator ● On
Display State On
Reading Memory Cleared
Error Queue Cleared at Power
–On; not cleared
by a front panel or remote interface
Reset command
● Stored States ● No change
● Calibration State ● Secured
Input/Output Configuration Factory Setting
Enable Interfaces:*
● LAN ● Enabled
● GPIB ● Enabled
● USB ● Enabled
Lan Settings:
*
● DHCP ● On
● Auto IP ● On
● IP Address ● 169.254.4.10**
● Subnet Mask ● 255.255.0.0
● Default Gateway ● 0.0.0.0
● DNS Server ● 0.0.0.0
● Host Name ● A-34410A-nnnn**
● LAN Services ● Enable All
GPIB Settings:*
●GPIB Address ● 22
* Interface enable or LAN setting changes
take effect only after a CPU reboot
** For model 34411A, the default
IP address is 169.254.4.11 and
host name is A-34411A-nnnn;
also note that nnnn is the last 4
digits of the serial number.
To Next Page
Loading...
Need help?
General
