122 34410A/11A User’s Guide
5 Specifications
These specifications apply when using the 34410A/34411A multimeter in
an environment that is free of electromagnetic interference and
electrostatic charge.
When using the multimeter in an environment where electromagnetic
interference or significant electrostatic charge is present, measurement
accuracy may be reduced. Particularly note:
• The voltage measurement probes are not shielded and can act as
antennas, causing electromagnetic interference to be added to the signal
being measured.
• Electrostatic discharges of 4000 V or greater may cause the multimeter
to temporarily stop responding, resulting in a lost or erroneous reading.
Note: Specifications are subject to change without notice. For the latest
specifications, go to the Agilent 34410A/11A product page.
www.agilent.com/find/34410A
To Next Page
Loading...
Need help?
General
