123
Agilent 7000 Series Triple Quadrupole GC/MS
Troubleshooting and Maintenance Manual
Agilent Technologies
5
CI Maintenance
To Minimize Foreline Pump Damage from Ammonia 124
To Replace the Methane/Isobutane Gas Purifier 125
To Clean the Reagent Gas Supply Lines 126
To Refill the CI Calibrant Vial 127
This chapter describes maintenance procedures and requirements that are
unique to a 7000 Series Triple Quad GC/MS equipped with the Chemical
Ionization hardware.
To Next Page
Loading...
