210 Troubleshooting and Maintenance Manual
9 Replacement Parts
Additional CI Parts
Table 28 and Table 29 show parts that may be required to maintain the 7000
Series Triple Quad GC/MS with CI. The parts in this section are related
directly to the CI accessory, and are in addition to the source parts listed in
Table 21; other parts for the MS can be found in the previous sections of this
chapter.
Table 2 8 CI flow control module
Item Description Part number
CI flow control module G7000-60450
1 CI calibration valve assembly G1999-60452
PFDTD calibrant 8500-8510
2 Calibration sample vial G3170-80002
Sample vial O-ring, 1/4-inch Viton 5180-4182
Solenoid valve and cable G1999-60452
CI cable from SC to CI Flow Module G3170-60808
Cable, CI to CI Bulkhead G7000-60825
CI Flow control PCA G7000-61000
3 Mass flow controller 0101-1006
4 Shutoff valve G1999-80402
Mass flow controller cable G1999-60464
5 Reagent gas select valve (Gas A and Gas B) G1999-80401
VCR gasket, 1/4-inch 0100-1436
VCR gasket, 1/8-inch 0100-0468
Methane/Isobutane gas purifier G1999-80410
Stainless steel tubing, 1/8-inch id, 20 feet 7157-0210
Swagelok ferrule, front, 1/8-inch, 20/package 5180-4110
Swagelok ferrule, rear, 1/8-inch, 20/package 5180-4116
Swagelok nut, for 1/8-inch fitting, 20/package 5080-8751
Swagelok nut and ferrules, 20 sets/package 5080-8751
To Next Page
Loading...
