20 Troubleshooting and Maintenance Manual
1 Introduction
Safety and Regulatory Certifications
The 7000 Series Triple Quad GC/MS conforms to the following safety
standards:
• Canadian Standards Association (CSA): CAN/CSA-C222 No. 61010-1-04
• CSA/Nationally Recognized Test Laboratory (NRTL): UL 61010–1
• International Electrotechnical Commission (IEC): 61010–1
• EuroNorm (EN): 61010–1
The 7000 Triple Quad MS conforms to the following regulations on
Electromagnetic Compatibility (EMC) and Radio Frequency Interference
(RFI):
• CISPR 11/EN 55011: Group 1, Class A
• IEC/EN 61326
• AUS/NZ
This ISM device complies with Canadian ICES-001. Cet appareil ISM est
conforme a la norme NMB—001 du Canada.
The 7000 Series Triple Quad GC/MS is designed and manufactured under a
quality system registered to ISO 9001.
Information
The Agilent Technologies 7000 Series Triple Quad GC/MS meets the following
IEC (International Electrotechnical Commission) classifications: Equipment
Class I, Laboratory Equipment, Installation Category II, and Pollution Degree
2.
This unit has been designed and tested in accordance with recognized safety
standards and is designed for use indoors. If the instrument is used in a
manner not specified by the manufacturer, the protection provided by the
instrument may be impaired. Whenever the safety protection of the MS has
been compromised, disconnect the unit from all power sources and secure the
unit against unintended operation.
To Next Page
Loading...
Need help?
General
