Agilent Technologies 7000 Triple Quadrupole GC/MS

208 Troubleshooting and Maintenance Manual
9 Replacement Parts
Table 2 6 Ferrules
Description Part number
For the GC/MS interface
• Blank, graphite-vespel 5181-3308
• 0.3-mm id, 85%/15% for 0.10-mm id columns 5062-3507
• 0.4-mm id, 85%/15%, for 0.20 and 0.25-mm id columns 5062-3508
• 0.5-mm id, 85%/15%, for 0.32-mm id columns 5062-3506
• 0.8-mm id, 85%/15%, for 0.53-mm id columns 5062-3538
For the GC inlet
• 0.27-mm id, 90%/10%, for 0.10-mm id columns 5062-3518
• 0.37-mm id, 90%/10%, for 0.20-mm id columns 5062-3516
• 0.40-mm id, 90%/10%, for 0.25-mm id columns 5181-3323
• 0.47-mm id, 90%/10%, for 0.32-mm id columns 5062-3514
• 0.74-mm id, 90%/10%, for 0.53-mm id columns 5062-3512