Agilent Technologies 7010 Series User Manual

5 Operating in EI Mode
To Set the JetClean Parameters for the Clean Only Mode
114 7000/7010 Series TQ GC/MS Operating Manual
To Set the JetClean Parameters for the Clean
Only Mode
1 Click the MS Parameters icon in the Instrument Control view.
2 Select Source Cleaning from the Triple Quadrupole MS Method Editor
navigation panel.
3 Select Clean Only from the Operation dropdown menu. (See Figure 36.)
4 Enter the parameters supplied by your method developer.
5 Save the method.
Figure 36. JetClean set to Clean Only mode

Agilent Technologies 7010 Series Specifications

General

Brand	Agilent Technologies
Model	7010 Series
Category	Laboratory Equipment
Language	English