1Introduction
The 7000/7010 Series TQ GC/MS
16 7000/7010 Series TQ GC/MS Operating Manual
The 7000/7010 Series TQ GC/MS
The 7000/7010 Series TQ GC/MS is a standalone capillary GC detector for use
with the Agilent 8890, 9000, or 7890 GCs. (See Figure 1 on page 18.) The TQ
GC/MS features:
• One split flow turbomolecular vacuum pump
• Rotary vane or optional dry scroll foreline pump
• A choice of two independently MS-heated high sensitivity EI sources
• An optional JetClean system for cleaning the ion source in place under
vacuum
• CI and EI modes available (PCI/NCI/EI)
• Two independently MS-heated hyperbolic Quads
• Single hexapole CC
• HED EM
• Independently GC-heated GC/MS interface with interface tip seal
• Independently GC-controlled CC gas flows
Physical description
The 7000/7010 Series TQ GC/MS is a rectangular box, approximately 47 cm
high, 35 cm wide, and 86 cm deep. The weight is 59 kg for the turbo pump
mainframe and 64 kg for the mainframe with CI. The attached foreline (roughing)
pump weighs an additional 22.2 kg.
The basic components of the instrument are:
• Frame/cover assemblies
• Vacuum system
• GC/MS interface
• Ion source
• Electronics
• CC
• Detector
• Front and rear analyzers
To Next Page
Loading...
Need help?
General
