Agilent Technologies 7010 Series User Manual

3 Installing Intuvo 9000 GC Column
To Replace an Intuvo GC Column
54 7000/7010 Series TQ GC/MS Operating Manual
5 Open the bus door and remove it by lifting the door vertically off its hinge
pins.
6 Lower the oven door.
7 Using the Intuvo torque driver, rotate all four column clamps off the column's
retainer ring. (See Figure 10.)
Figure 9. 9000 GC front door, bus door, oven door, and Intuvo torque driver
Bus door
Oven door
Intuvo torque driver
Front door

Agilent Technologies 7010 Series Specifications

General

Brand	Agilent Technologies
Model	7010 Series
Category	Laboratory Equipment
Language	English