The Keypad 3
Operation 19
The Run Keys
Use these keys to start sample preparation, stop preparation,
and move the sample tray prior to loading sample vials.
Stop During a sequence:
• Press once to pause the sequence. Current
samples continue processing, but no new samples
will be started. Press [Start] to resume.
• Press twice (within 5 seconds) to abort the
sequence. Any vials in the vial oven will be
returned to the tray.
Start Begin processing the next sample or sequence of
samples. When processing is complete for a sample,
the HS performs an injection to the GC and sends a
Start Run signal.
Tray Park/Carousel
Advance
• For the 111 vial model, press to park or unpark the
tray. (Park the tray to load/unload vials or vial
racks.) If pressed during a running sequence, the
sequence pauses until the tray is unparked.
• For the 12 vial model, press to advance the
carousel one position.
Priority Sample 111 vial tray model only. Standalone use only.
Press to insert a sample vial into the running
sequence. Disabled when using data system control.
Run keys
To Next Page
Loading...
Need help?
General
