28 Operation
3 The Keypad
Keypad Functionality When the HS Is Controlled by an Agilent Data System
While under data system control, the keypad may be locked
for general use. This locking feature prevents a user from
unintended changes to the headspace method while the data
system controls the instrument. If locked, the following
changes occur:
• Method parameters can be viewed, but not changed.
• You cannot load, edit, or save a method.
• You cannot load, edit, or save a sequence.
• You cannot change the instrument configuration or
perform advanced functions.
While under data system control, the keypad can be used:
• To view sequence status, including time data, by selecting
[Status].
• To view the method settings.
• To pause or abort a sequence by selecting [Stop].
• To find which computer is controlling the HS by pressing
[Options] > Communication, then scrolling. The name of the
computer controlling the HS is listed below the Enable
DHCP setting, along with the number of hosts connected to
the HS.
To Next Page
Loading...
Need help?
General
