Agilent Technologies 7697A - To Delete a Method

Methods 6
Operation 59
To Delete a Method
You can delete only the internal, user- defined methods. To
delete a method:
1 Press [Method].
2 Scroll to the user- defined method to delete.
3 Press [Delete]. When prompted, press [On/Yes] to confirm.
Alternately:
1 Press [Delete].
2 When prompted, press [Method].
3 When prompted, scroll to the method number to delete,
then press [Enter].
4 When prompted, press [On/Yes] to delete the selected
method, or [Off/No] to return to the selection list.