Agilent Technologies 7697A - To Delete a Sequence

Sequences 7
Operation 73
To Delete a Sequence
To delete a sequence:
1 Press [Delete].
2 When prompted, press [Seq].
3 When prompted, scroll through the list of sequences to
the desired sequence. Press [Enter] to select this sequence.
4 When prompted, press [On/Yes] to confirm and delete the
sequence, or [Off/No] to cancel.
Alternately:
1 Press [Seq].
2 Scroll to the user- defined sequence to delete.
3 Press [Delete]. When prompted, press [On/Yes] to confirm,
or [Off/No] to cancel.