Sequences 7
Operation 71
To Load a Sequence
To load a sequence:
1 Press [Load].
2 When prompted, press [Seq].
3 When prompted, select the sequence to load from the list,
then press [Enter].
4 When prompted, press [On/Yes] to load the selected
sequence, or [Off/No] to return to the selection list.
Alternately:
1 Press [Seq].
2 Scroll to the desired sequence.
3 Press [Load]. When prompted, press [On/Yes] to load the
selected sequence, or [Off/No] to return to the selection
list.
To Next Page
Loading...
