Agilent Technologies 7697A - To Save (Store) a Sequence

70 Operation
7 Sequences
To Save (Store) a Sequence
Storing a sequence saves the current sequence to nonvolatile
memory. You do not have to be viewing the current sequence
to save it.
If editing the sequence, save it as follows:.
1 Press [Store].
2 When prompted, press [Sequence].
3 When prompted, scroll to the desired sequence number to
save.
4 Press [Enter].
5 When prompted, press [On/Yes] to save, or [Off/No] to
return to the selection list.
Alternately:
1 Press [Seq].
2 Scroll to the sequence number to save.
3 Press [Store]. When prompted, press [On/Yes] to save, or
[Off/No] to return to the selection list.