Methods 6
Operation 53
Vial size Select the sample vial size for all vials using this
method.
Shaking Set the level of shaking for the sample during
equilibration in the oven. (111 vial model only)
[Carrier] key
Pressure (read only display) Carrier control: GC Control For other carrier parameters, see the Advanced
Operation Guide.
[Adv Function] key See the Advanced Operation Guide.
Extraction mode Set the type of extraction for the method, Single,
Multiple, or Concentrated.
# of extractions Concentrated extractions Enter the number of extractions to concentrate.
Vent between extractions Concentrated extractions On or Off. Vent vial between concentrating extractions.
Purge flow Purge sample probe and loop with vial pressurization
gas after removing the vial from the probe.
Purge time
Barcode reader Requires the 111 vial tray and optional barcode reader.
Select to set barcode reader parameters.
Sequence actions Set how the HS should handle unexpected sequence
issues, such as a missing vial or vial size mismatch.
Method development Access parameters to use when developing methods.
[Adv Function] > Barcode reader Requires the 111 vial tray and optional barcode reader.
BCR action Set whether and how to proceed if a barcode error
occurs.
BCR symbology Set the expected symbology for barcodes used with
this method.
Enable BCR checksum Expect barcodes to use a checksum feature (availability
also depends on barcode symbology).
Table 5 Common method parameters (continued)
Parameter Enabled in modes Description
To Next Page
Loading...
Need help?
General
