The Stability Application Applications
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition 255
All results can be:
• displayed on the screen,
• printed out to hardcopy, or
• saved to disk drive of your Agilent 8164A/B Lightwave Measurement System.
The total time concludes after the last dwell time period, not after the last
averaging time period.
The Stability application enables you to make periodic power
measurements over a relatively long time period (23 hours, 59 minutes
and, 59 seconds).
The Stability application differs from “The Logging Application” on
page 242 because you may use auto-ranging mode, see step 9 on page 258
for more information.
NOTE
To Next Page
Loading...
