To set up the external trigger test 2-26
To set up the external arm test 2-27
To set up the harmonic distortion test 2-28
To set up the input capacitance test 2-30
To set up the input resistance test 2-32
To set up the dc offset test 2-33
To set up the spurious signals test 2-34
To set up the noise test 2-35
To set up the cross talk test 2-36
To set up the anti-alias filter test 2-38
To set up the source amplitude accuracy test 2-39
To set up the input rtn loss test 2-40
To set up the source rtn loss test 2-43
To set up the source distortion test 2-45
Measurement Uncertainty 2-51
Performance Test Record 1 through 14
Operation Verification Test Record 1 through 8
Index
Agilent 89400-Series Documentation Roadmap
About this edition
Need Assistance?
xvi
To Next Page
Loading...
