218
Chapter 7 Plug-in Modules
N2276A Dual 1-to-6(4) Microwave MUX/Attenuator Module
7
Up to two attenuators can be added to the N2272A using provided
ribbon cables. The following attenuators (user provided) are available
from Agilent:
N2276A Simplified Schematic
The simplified schematic below shows the Agilent 87106B
1-to-6 microwave switch (option 206) as used in the Agilent N2276A.
Please refer to the switch or attenuator data sheets for information
specific to each switch and attenuator.
Only one channel in a switch may be closed at a time. Closing a channel
will open any previously closed channel.
External Attenuators (up to two may be used)
0 to 11 dB in 1 dB steps
Agilent 84904K up to 26.5 GHz
Agilent 84904L up to 40 GHz
0 to 90 dB in 10 dB steps
Agilent 84906K up to 26.5 GHz
Agilent 84906L up to 40 GHz
0 to 70 dB in 10 dB steps
Agilent 84907K up to 26.5 GHz
Agilent 84907L up to 40 GHz
6
5 432
1C
87106A/B/C
To Next Page
Loading...
Need help?
General