229
Chapter 7 Plug-in Modules
N2282A 1-to-8 Optical Switch Module
4
7
CH00 through CH07 are opened when a ROUTe:CLOSe (@x08)
command is sent (where x is the slot number containing the N2282A).
N2282A Wiring Information
Use SC/APC connectors for wiring external optical signals to the N2282A
module. The rear panel is shown below.
Note The Agilent N2282A module extends an additional 8.5 cm beyond the
rear panel of the 3499A/B/C mainframe.
Ch
Ch
Ch
Ch0
Ch
Ch
Ch0
OM