3 Menu Reference
126 E4418B Power Meter User’s Guide
•
Press this softkey to toggle the display offset value on or off. The default is
“Off”. The offset value is set using
.
•
Press this softkey to enter a display offset value. Use the , , ,
and keys to change the value. To confirm your choice, press .
is automatically set to “On” when a value is entered using
.
The softkey menu structured to this key affects the system setup.
Press this key to access the “Save/Recall” menu and screen which allows you
to save and recall setups which you use frequently.
•
Press this softkey to save the current setup of the power meter to the
highlighted file. First, use the
and keys to scroll through the
displayed files. When the required file is highlighted, press .
•
Press this softkey to recall a required power meter setup from the
highlighted file. First, use the
and keys to scroll through the
displayed files. When the required file is highlighted, press .
•
Press this softkey to change a file name. First, use the and keys
to scroll between the displayed files. When the file name you require to
change is highlighted, press
. A pop- up window appears on the
screen. Use the , , , , , and keys
to change the file name. To confirm your choice, press .
•
Press this softkey to accept your edited file name as a new name.
To Next Page
Loading...
