2 Power Meter Operation
60 E4418B Power Meter User’s Guide
Selecting Units of Measurement from the Softkeys
In various softkey menu structures, you are required to enter the units of
measurement for power. In some cases, due to the wide power range
available, the following menu is displayed:
Pressing or increases or
decreases the multiplier shown in front of . Pressing after the
correct multiplier has been selected confirms the entry.
Increment
Decrement
Multiplier
Multiplier
Cancel
mW
Cancel
mW
nW
W
Some softkeys may be grayed out so that an invalid value cannot be entered.