xvi E4418B Power Meter User’s Guide
2 Power Meter Operation
Introduction 22
Battery Operation (Option 001) 24
General Information 24
Running Time 25
Charging Times 26
Backlight 26
Battery Removal/Replacement 27
Zeroing and Calibrating the Power Meter 29
Zeroing the Power Meter 29
Zero/Cal Lockout 29
Calibrating the Power Meter 30
Calibration Procedure Using Agilent E-Series Power Sensors and N8480 Series Power Sensors
(excluding Option CFT) 30
Calibration Procedure using Agilent 8480 Series power sensors and N8480 Series Power
Sensors with Option CFT 31
Zeroing and Calibrating Using TTL Inputs 35
Making Measurements with the Agilent E-Series Power Sensors and N8480 Series Power
Sensors (excluding Option CFT) 39
Procedure 39
Making Measurements with the Agilent 8480 Series Power Sensors and N8480 Series Power
Sensors with Option CFT 41
Procedure 41
Making Measurements using Sensor Calibration Tables 44
Selecting a Sensor Calibration Table 45
Making the Measurement 45
Editing Sensor Calibration Tables 46
Making Measurements using Frequency Dependent Offset Tables 53
Selecting a Frequency Dependent Offset Table 54
Making the Measurement 55
Editing Frequency Dependent Offset Tables 56
Setting the Units of Measurement 59
Selecting Units of Measurement from the Softkeys 60
Making Relative Measurements 61
Procedure 61
Setting the Resolution 62
To Next Page
Loading...
