102 Agilent 1100 Series Fraction Collectors User’s Guide
A Safety Information
Safety Information
Safety Information
The following general safety precautions must be observed during all phases of
operation, service, and repair of this instrument. Failure to comply with these
precautions or with specific warnings elsewhere in this manual violates safety
standards of design, manufacture, and intended use of the instrument. Agilent
Technologies assumes no liability for the customer’s failure to comply with
these requirements.
General
This is a Safety Class I instrument (provided with terminal for protective
earthing) and has been manufactured and tested according to international
safety standards.
WARNING
If you are using flammable solvents, remove the well-plates from the tray when you
turn off the sampler. You avoid the risk of building explosive gas mixtures in the tray
compartment.
WARNING
If you are using flammable solvents, cover the well-plates with closing mats to
avoid the risk of building explosive gas mixtures.
WARNING
After a leak in the sampler, make sure the leak plane is cleaned and dry.
To Next Page
Loading...
Need help?
General
