E-4
Pause ........................... A defined period during which the HEARTSTREAM FR2 does not perform
rhythm analysis.
Periodic Selftests ........ Daily, weekly, and monthly tests automatically conducted by the FR2 when it
is in the standby mode. The tests monitor many of key functions and
parameters of the FR2, including battery capacity and the state of its internal
circuitry.
Presenting ECG .......... The heart rhythm seen by the H
EARTSTREAM FR2 when it is first connected to
the patient (via the defibrillation pads) and begins rhythm analysis.
Prompts ....................... The voice commands and screen text used to guide the responder through use
of the H
EARTSTREAM FR2 to treat the patient.
Protocol ....................... A sequence of operations performed by the H
EARTSTREAM FR2 to direct
patient care in the AED mode.
Protocol Timeout ........ A programmable interval between shocks, used by the H
EARTSTREAM FR2 to
decide if the shocks are part of the same shock series.
Read (Data) ................. A feature of the H
EARTSTREAM FR2 that allows it to read setup data from a
H
EARTSTREAM M3854A data card.
Receive (Data) ............ A feature of the H
EARTSTREAM FR2 that allows use of its infrared (IR)
communications port to receive revised setup and clock settings directly from
another device.
Record Voice ............... An optional feature of the H
EARTSTREAM FR2 that allows sound recording to
a data card during use of the device in an incident. Activation of this feature
requires revision of the H
EARTSTREAM FR2’s default settings.
Rhythm Analysis ........ See SMART Analysis.
Send (Data) ................. A feature of the H
EARTSTREAM FR2 that allows use of its infrared (IR)
communications port to send data directly to another FR2 or a computer
running C
ODERUNNER software.
To Next Page
Loading...
Need help?
General
