M3860A and M3861A HEARTSTREAM FR2 Defibrillator 7-1
7 Data Management and Review
Overview
The HEARTSTREAM FR2 is designed to make it easy to manage incident data.
Some information is automatically stored in the internal memory of the
H
EARTSTREAM FR2. More detailed data can be stored on a data card if
desired. The incident information stored in the H
EARTSTREAM FR2’s internal
memory, or a summary of the information recorded on the data card, can then
be displayed on the H
EARTSTREAM FR2 screen for review. In addition,
C
ODERUNNER software can be used on a personal computer to store and
review the detailed recorded information from a data card.
Recording Incident Data
The HEARTSTREAM FR2 has two ways of recording information about an
emergency incident, so it can be reviewed after the incident: in internal
memory and on a data card.
Recording Data in Internal Memory
Summary data for an incident is automatically recorded in internal memory
by the H
EARTSTREAM FR2 while you are using it.
Recording Data on a Data Card
M3854A data cards can be used to store several hours of detailed incident
data, including events and ECG.
IMPORTANT: To record incident data on a data card, the data card
must be installed before you turn on the H
EARTSTREAM FR2.
To Next Page
Loading...
