Index-8 Service Guide N5230-90024
Index
Option 014, configurable test set
block diagram, 5-17
description of
, 2-4
normal configuration, 5-17
operation
, 5-16
Option 080, frequency offset mode
, 2-4
Option 140/240
description of, 2-3
Option 145/245
description of, 2-3
Option 146/246
description of, 2-3
Option 1CM, rack mount without handles
,
2-4
Option 1CM, rack mount without handles
option
, 2-4
Option 1CP, rack mount with handles
, 2-4
Option 1CP, rack mount with handles
option
, 2-4
Option 1E1, source attenuators
, 2-5
operation, 5-16
Option 897
built-in tests for commercial
calibration
, 2-5
Option 898
built-in tests for standard compliant
calibration, 2-5
Option F20, 20 GHz frequency range
, 2-5
Option F40, 40 GHz frequency range
, 2-5
Option F50, 50 GHz frequency range
, 2-5
ordering information
options and upgrades, 2-3, 2-6
replaceable parts
, 6-3
output power, source
accuracy test, 3-28
linearity
, 3-29
maximum test
, 3-29
output power, test port
accuracy test, 3-28
linearity
, 3-29
maximum test
, 3-29
overlays
front panel
illustrated
, 6-9
part numbers
, 6-8
P
pads
required for servicing, 2-8
paint
touch-up
part numbers
, 6-48
PARALLEL
port
rear panel connector
, 5-25
troubleshooting
, 4-18
part numbers
accessories
USB
, 6-47
cables
GPIB, 6-46
cables, all
in top assembly, all options
, 6-14
documentation
, 6-46
hardware
in bottom assembly
, 6-34
in external analyzer
, 6-38
in hard disk drive, 6-42
in hard disk drive (serial ATA)
, 6-44
in internal analyzer
, 6-36
in rear panel assembly, 6-40
in top assembly, all options
, 6-32
kits
handle
, 6-48
rack mount
, 6-48
locating
by reference designator
, 6-6
by type of part
, 6-7
for assemblies
, 6-7
for hardware
, 6-7
for miscellaneous parts
, 6-7
paint
touch-up
, 6-48
protective end caps
for connectors
, 6-46
replaceable cables
in bottom assembly, option 220
, 6-18
in bottom assembly, option 225
, 6-22
in bottom assembly, option 420/520,
6-26
in bottom assembly, option 425/525
,
6-30
replaceable parts
analyzer covers
, 6-38
analyzer feet, 6-38
analyzer strap handle
, 6-38
in bottom assembly, all options
, 6-34
in bottom assembly, option 225
, 6-20
in bottom assembly, option 425/525
,
6-28
in external analyzer, 6-38
in front panel assembly
, 6-8, 6-10
in hard disk drive (serial ATA)
, 6-44
in hard disk drive assembly, 6-42
in internal analyzer
, 6-36
in rear panel assembly
, 6-40
in top assembly, all options, 6-12,
6-32
miscellaneous analyzer
, 6-46
supplies
EMI/RFI
, 6-47
ESD
, 6-47
tools
service
, 6-46
upgrade kits
, 6-47
parts
in bottom assembly
illustrated
, 6-35
part numbers, 6-34
in bottom assembly, option 220
illustrated
, 6-17
part numbers, 6-16
in bottom assembly, option 225
illustrated
, 6-21
part numbers, 6-20
in bottom assembly, option 420/520
illustrated
, 6-25
part numbers, 6-24
in bottom assembly, option 425/525
illustrated
, 6-29
part numbers
, 6-28
in external analyzer
illustrated
, 6-39
part numbers
, 6-38
in front panel assembly
illustrated
, 6-9, 6-11
part numbers
, 6-8, 6-10
in hard disk drive (parallel ATA)
assembly
illustrated
, 6-43
in hard disk drive (serial ATA)
assembly
illustrated
, 6-45
in hard disk drive assembly
part numbers
, 6-42
in hard disk drive assembly (serial
ATA)
part numbers
, 6-44
in internal analyzer
illustrated
, 6-37
part numbers
, 6-36
in rear panel assembly
illustrated
, 6-41
part numbers
, 6-40
in top assembly, all options
illustrated
, 6-13, 6-33
part numbers
, 6-12, 6-32
locating
by reference designator
, 6-6
by type of part
, 6-7
miscellaneous
part numbers
, 6-46
required for servicing
, 2-9
replaceable
listing of
, 6-6
ordering information
, 6-3
parts, hardware
in bottom assembly
illustrated
, 6-35
part numbers
, 6-34
in external analyzer, all options
illustrated
, 6-39
part numbers
, 6-38