Contents
Agilent SureCycler 8800 Setup and User’s Guide 7
Editing PCR Programs 53
To edit program step parameters 53
To copy a PCR step 54
To add or delete a PCR step 54
To delete a PCR program 54
Running a PCR Program 55
To run a PCR program 55
To stop or pause a program 55
Running an Incubation 56
To set up and run an incubation 56
Viewing Reports 57
To view reports 57
To delete a report 57
Troubleshooting 58
If PCR yield is low when running small reaction volumes with the Standard
ramp rate 58
If no actual temperature is displayed during the run 58
If the program does not start 58
If condensation is found in tubes during a run 59
If the sealed microplate loses sample volume 59
If USB devices including memory stick and keyboard not recognized 59
If cycler does not turn on 59
If screen is blank and unlit 60
If screen is lit but shows no information or has missing characters 60
60
5 Maintenance and Updates 61
Maintenance 62
Cleaning 62
Replacing a fuse 62
Software Updates 63
To Next Page
Loading...
Need help?
General
