Getting Started Tutorial 1
Agilent U1251A/U1252A User’s and Service Guide 15
• 50,000 count precision true RMS digital multimeter,
designed to meet IEC61326- 1:2005 / EN61326- 1:2006
Category III 1000 V/ CAT IV 600 V Overvoltage Protection,
Pollution Degree II standards
Adjusting the Tilt-Stand
To adjust the meter to a 60° standing position, pull the
tilt- stand outwards to its maximum reach.
To adjust the meter to a 30
° standing position, bend the tip
of the stand so that it is parallel to the ground before
pulling the stand outwards to its maximum reach.
IR-USB cable
To P C
(host)
Tilt-stand at 30 º
IR-USB cable
To P C
(host)
Tilt-stand at 60°
To Next Page
Loading...
