Features and Functions 3
Agilent U1251A/U1252A User’s and Service Guide 71
Interval Logging
Interval (automatic) logging mode can be specified in the
Setup mode.
1 Press for more than 1 second to store the present
value and function on the primary display into the
non- volatile memory. and the logging index are
indicated. The readings are automatically saved into the
permanent memory at intervals set using the Setup mode.
2 Press for more than 1 second to exit this mode.
The maximum data that can be stored is 200 entries. When the 200 entries
are filled, “FULL” is indicated on the secondary display.
When interval (automatic) logging is enabled, all keypad operations are
disabled, except for the LOG function.
To Next Page
Loading...
Need help?
General
